Why brick and iron together
A brick knee wall with wrought iron on top gives a front yard the two things homeowners usually want at once: a solid, permanent base that reads as part of the house, and an open iron top that keeps the yard visible and secure without walling it off. It is the fence you see on established streets across La Puente, Hacienda Heights, West Covina, Walnut, and Rowland Heights, and it is a combination Apexguard Fence builds regularly for frontage and driveway entrances. Because the masonry and the iron are designed together, the pilaster spacing, cap height, and panel width line up instead of looking pieced together.
Six looks, one street
Every rendering below is the same house, same camera, and same sunlight — only the fence changes — so you can compare the materials fairly. Click any one to load it into the designer above.
How a brick and iron fence is built
The wall starts with a continuous concrete footing sized for your soil, then a block or brick knee wall — usually 2 to 3 feet tall — with pilasters every 8 feet or so and at every gate and corner. Precast concrete caps finish the wall and the pilasters and shed water away from the masonry. The iron panels are welded in our shop from ⅝" pickets and 1½" rails, galvanized and powder-coated in the finish you choose, and anchored to the pilasters with brackets so the panel sits a few inches above the cap. Walk gates and driveway gates are fabricated to match, and driveway gates can be automated.
Masonry options
Clay brick in classic red, buff, brown, or charcoal ironspot; reclaimed “Old Chicago” brick for an older-neighborhood look; slump block and split-face block for a ranch or contemporary property; stacked ledger stone veneer over block; or a smooth stucco finish that matches the house. Most masonry can also be combined — for example, stucco wall faces with brick-capped pilasters.
Iron styles
Flat-top picket, spear top with pressed finials, arched (rainbow) top between pilasters, a double top rail with a ring band, a forged S-scroll band, or modern horizontal flat bars with no pickets. All are powder-coated in satin black, oil-rubbed bronze, dark brown, or charcoal grey. See more in our wrought iron fence styles guide.
Front-yard height rules
Most cities in the San Gabriel Valley cap fences in the front setback at roughly 3 to 4 feet, with an allowance for open iron above a lower solid wall in some codes, and taller fences behind the setback. The designer shows a typical 6-foot overall height for illustration; we confirm the rule for your address and adjust the wall and panel heights before quoting.
Brick and iron fence FAQ
How tall can a brick and wrought iron front-yard fence be?
Most Southern California cities limit front-yard fences to about 3 to 4 feet in the front setback, with taller fences allowed once you are behind the setback line. Corner lots and driveway sight lines can add limits. We check the rule for your address before we quote so the design you pick is one you can actually build.
What is the typical construction of a brick wall with iron on top?
A typical front-yard build is a 2’ to 3’ brick or block knee wall on a concrete footing, 16”×16” pilasters roughly 8 feet on center, precast concrete caps, and welded steel picket panels anchored between the pilasters. Gates are framed to match the panels.
Can I choose a different brick than the ones in the designer?
Yes. The designer shows the masonry finishes we build most often, but any clay brick, block, stone veneer, or stucco finish can be matched to your house. Bring a photo of your home and we will recommend the closest match.
How much does a brick and iron fence cost?
Brick and iron is a premium combination because it includes footings, masonry, and fabricated iron. Cost depends mostly on linear feet, wall height, number of pilasters, gates, and site access rather than the iron style you choose. A free on-site measurement gives you a written number for your property. Our wrought iron fence cost guide explains what drives the price.
Do you build matching gates for a brick and iron fence?
Yes. Walk gates and driveway gates are built to match the picket style, finial, and powder-coat color you choose, and driveway gates can be manual or automated with an opener, keypad, and remote.
Will the iron rust?
The steel panels are welded, then galvanized and powder-coated in the color you pick. With that finish and occasional touch-up, iron holds up for decades in the dry Southern California climate.