Project Story · Los Angeles, CA · October 2026

8 ft of steel that looks like a hedge: a Los Angeles privacy fence

Green foliage-print corrugated steel panels on a galvanized steel frame — full 8 ft privacy and security along a property line, without the bare-metal industrial look.

8 ft green foliage-print corrugated steel privacy fence on a galvanized steel frame — a real Apexguard Fence project in Los Angeles, CA

The build: 8 ft green foliage-print steel privacy fence on a galvanized frame — Los Angeles, CA.

The project

This Los Angeles property needed a tall, solid barrier along a long property line running behind a building — something that blocks every sightline, stops foot traffic, and stands up to years of sun and wind. A plain metal wall would do the job but look like a warehouse. So we built it in 8 ft corrugated steel panels with a green foliage print: from the street side it reads like a hedge, up close it's solid steel.

The frame is what makes a fence this tall work. Galvanized square-tube steel posts are set in concrete footings, tied together by three horizontal rails — top, middle, and bottom — so every panel is fastened along three lines and wind load goes into the posts instead of flexing the sheet. Galvanized steel won't rust out at grade, and the long straight run keeps the top line dead level from end to end.

  • Location: Los Angeles, CA — long property-line run behind a building
  • Height: 8 ft full privacy
  • Panels: corrugated steel with green foliage print finish
  • Frame: galvanized square-tube posts in concrete, three horizontal rails
Galvanized steel posts and three-rail frame holding 8 ft green steel privacy panels in Los Angeles, CA by Apexguard Fence
Three rails per bay: the panels are locked in at top, middle, and bottom.
Straight section of 8 ft foliage-print steel privacy fence in Los Angeles, CA by Apexguard Fence
Straight and level — the print reads as greenery from a distance.
End of the 8 ft green steel privacy fence run meeting the neighboring property in Los Angeles, CA by Apexguard Fence
The run closes tight to the neighboring fence line.
7 ft white corrugated steel panel privacy fence — a real Apexguard Fence project in Whittier, CA
Prefer white? Our 7 ft steel privacy fence in Whittier.

Why steel panels for tall privacy fences

At 8 ft, wood gets expensive, heavy, and fragile: tall boards warp, posts lean under wind load, and termites go to work at the base. Block walls solve that but cost far more and need engineering. Corrugated steel on a galvanized frame sits in the sweet spot — light enough to set quickly, strong enough to stand 8 ft without sagging, impossible to see through, and nothing to rot, burn, or paint. Printed finishes like this foliage pattern take the last objection off the table: it doesn't have to look industrial.

Corrugated steel privacy fencing typically runs about $40–$70 per linear foot installed, with 8 ft heights and printed panels toward the upper end. Ballpark yours with the online estimate and confirm with a free on-site measurement.

Built in Los Angeles

This project was built in Los Angeles, CA. If you're searching for an 8 ft privacy fence, a metal privacy fence, a corrugated steel fence, or a commercial privacy fence in Los Angeles, Apexguard Fence is a licensed crew (CSLB #1148097) serving LA County and the San Gabriel Valley, with a 1-year workmanship warranty and 5.0-star Google reviews. Hablamos español.

Project FAQ

What is a foliage-print steel privacy fence?

It’s a corrugated steel panel fence with a factory-printed green foliage pattern baked into the finish. From a distance the wall reads like a hedge or green screen instead of bare metal, so you get the strength and full privacy of steel without the industrial look. On this Los Angeles project the printed panels run 8 ft tall on a galvanized steel post-and-rail frame.

Why build an 8 ft privacy fence?

Eight feet blocks sightlines from neighboring lots, alleys, and second-story windows that a 6 ft fence can’t, and it’s much harder to climb. It’s the standard height for screening yards, storage areas, and property lines next to busy or commercial neighbors. Fences over 6 ft generally need city approval in Los Angeles, which we handle as part of the job.

How is a tall steel panel fence built to handle wind?

A solid 8 ft panel catches a lot of wind, so the frame matters more than the panels. This fence uses galvanized square-tube steel posts set in concrete footings with three horizontal rails — top, middle, and bottom — so each panel is fastened at three lines and the load spreads into the posts instead of flexing the sheet. Galvanized steel also won’t rust out at the base the way plain steel does.

How much does an 8 ft steel privacy fence cost?

Corrugated steel privacy fencing typically runs about $40 to $70 per linear foot installed, with 8 ft heights and printed panels toward the upper end of that range. Long straight runs like this one are the most cost-efficient per foot. We give a firm written quote after a free on-site measurement.

Do you install steel privacy fences in Los Angeles?

Yes — this project was built in Los Angeles, CA. Apexguard Fence installs corrugated steel privacy fences, wrought iron, vinyl, and security gates across Los Angeles County and the San Gabriel Valley for homes and commercial properties. We’re a licensed (CSLB #1148097) fence and gate contractor, and every project starts with a free on-site measurement.

Need a tall privacy fence? Call Apexguard Fence at (626) 692-3568 for a free on-site measurement and written quote.

Get a Free Quote See Your Price Now