The build: 7 ft corrugated steel privacy fence along the rear alley — Whittier, CA.
The project
This Whittier backyard backs onto an alley — which means two problems at once: privacy and graffiti. The old fence solved neither. The replacement is a 7 ft corrugated steel panel privacy fence: ribbed steel panels screwed to a welded steel post-and-rail frame, posts set in concrete, running the full rear line and returning along the side to the garage, with a matching steel access door built into the run.
The color was a deliberate choice, not a default. White beats taggers: graffiti on a smooth white steel panel wipes off with solvent or disappears under a quick roll of standard white paint — no color matching, no shadowing, no evidence it ever happened. And because every panel is fastened with screws rather than welded or nailed, any single panel can be swapped without touching its neighbors. We left 3 spare matching panels with the homeowner, so if a car clips the alley side or a dent shows up years from now, the fix is a screwdriver and five minutes.
- Location: Whittier, CA — rear yard along the alley
- Fence: 7 ft corrugated steel panels, white, on a welded steel frame
- Layout: full rear line plus side return to the garage, integrated steel access door
- Maintenance plan: graffiti-cleanable white finish; 3 spare panels left with the owner for future swaps
Why corrugated steel beats wood for alley-facing fences
Wood privacy fences along SoCal alleys have a short, hard life: sun warps the boards, sprinklers rot the bottoms, termites do the rest, and every tagging means a stain that never fully sands out. Steel panels solve the whole list — they can't rot, can't be eaten, don't burn, and don't warp — and the smooth factory finish is exactly what makes graffiti recovery easy. Screwed-on panels add the advantage no welded fence has: panel-by-panel replaceability. It's why this system is standard on commercial yards, and why it's showing up in more Whittier backyards.
A corrugated steel privacy fence typically runs about $40–$70 per linear foot installed depending on height and gates — competitive with a good wood fence up front, and far cheaper over ten years. Ballpark yours with the online estimate and confirm with a free on-site measurement.
Built in Whittier
This project was built in Whittier, CA. If you're searching for a fence company in Whittier, a metal privacy fence, a corrugated steel fence, or a graffiti-resistant fence for an alley-facing yard, Apexguard Fence is a licensed crew (CSLB #1148097) serving Whittier and the San Gabriel Valley, with a 1-year workmanship warranty and 5.0-star Google reviews. Hablamos español.
Project FAQ
What is a corrugated steel panel privacy fence?
A corrugated steel (metal panel) privacy fence uses ribbed steel roofing-style panels fastened to a welded steel post-and-rail frame. The result is a solid, full-privacy wall that never rots, can’t be eaten by termites, doesn’t burn, and shrugs off Southern California sun. On this Whittier project we built it 7 ft tall around a backyard, with panels in white.
Why choose a white fence along an alley?
Alley-facing fences in LA County get tagged. The homeowner chose white on purpose: graffiti on a smooth white steel panel can be wiped with solvent or rolled over with standard white paint in minutes, and the repair is invisible — no color matching, no panel staining. It keeps a tagged fence from staying tagged.
Can individual fence panels be replaced later?
Yes — that’s a key advantage of screwed-on steel panels over welded or nailed fencing. If one panel is ever dented or damaged, it unscrews and a new one goes on in minutes without touching the rest of the fence. On this Whittier project we left 3 spare matching panels with the homeowner, so a future swap costs nothing but a few screws.
How tall can a backyard privacy fence be in Whittier?
Most Southern California cities, including Whittier, generally allow rear and interior side-yard fences up to 6 ft by right, with taller fences possible subject to city approval. This project runs 7 ft for full privacy from the alley. We confirm your city’s exact height rules and handle any needed approvals as part of the job.
Do you install metal privacy fences in Whittier?
Yes — this project was built in Whittier, CA. Apexguard Fence installs corrugated steel privacy fences, wrought iron, vinyl, and gates across Whittier and the greater San Gabriel Valley. We’re a licensed (CSLB #1148097) fence and gate contractor, and every project starts with a free on-site measurement.
Want a privacy fence that stays low-maintenance? Call Apexguard Fence at (626) 692-3568 for a free on-site measurement and written quote.